SGS Safety Grid System – Banner – SGSSA2-500Q8
SGS Safety Grid System, Active Transceiver
Beams: 2; Resolution: 500 mm; Range: 0.5-8 m
8-pin M12 Integral QD
Auto/Manual Start/Restart, EDM
Mounting Hardware Ordered Separately
| Auxiliary Output | No |
|---|---|
| Max Operating Range (m) | >4 – <=8 |
| Resolution (mm) | 2 – 500 |
| Test Input | No |
| Connector type | M12 |
| Effective Aperture Angle | Type 4 Per IEC 61496-2 |
| Electrical Safety Class | III |
| External Monitoring Device | 1 Channel |
| Fault Output | No |
| Fixed Blanking | No |
| Functional safety (SIL/PL) | SIL3; CL3 |
| Housing Finish | Yellow Polyester |
| Housing material | Aluminum; PMMA |
| Item Status | RELEASED |
| Nominal voltage | 24 V dc at 0.5 A each |
| Number of channels | 0.5 – 8 |
| Operating Temperature | 0 to +55 deg. C; RH 95% |
| Operating voltage | 24 V dc |
| Number of Pins (Receiver/Emitter) | 8 |
| PL Rating | Ple |
| Protection class shaft | IP65 |
| Receptacle housing material B | Aluminum |
| Resolution | Body Detection (grids and points) |
| Resolution incremental (ppr) | No |
| Response Time | 11 |
| Safety Level | Type 4 |
| Vibration | 10-55 Hz at 0.35 mm |
| Shock | 10g at 16ms (6000 cycles) |
| Trip/Latch Output | Selectable |
| System Type | Transceiver – Active |
| Overall Length (mm) | 606.35 |
| Defined Area Height Range (mm) | >350 – <=650 |
| Defined Area Height (mm) | 500 |
| Dimensions WxD (mm) | 52 x 56.9 |
| Supply Current | 500 mA |
| Short Protection | Yes |
Description
SGS Safety Grid System, Active Transceiver
Beams: 2; Resolution: 500 mm; Range: 0.5-8 m
8-pin M12 Integral QD
Auto/Manual Start/Restart, EDM
Mounting Hardware Ordered Separately
