RFID – Banner – SI-RFST-LP8
SI-RF Safety Switch
Coding: Low; Diagnostics: Series PNP
Reset: Automatic; Connector: 250 mm 8-pin M12 Pigtail QD
Used With: SI-RF-A
| Actuator (Safety) Contacts | 2 NC |
|---|---|
| Auxilliary Output | Yes |
| Connection | Pigtail QD |
| Device Size | 36 x 26 x 15 |
| ISD Connect Compatible | No |
| In-Series Diagnostics | No |
| Relative Humidity | 93% @ 50 °C |
| SISTEMA | PFHd of 1 x 10-9 |
| Safety Category | Cat 4 |
| Switch Style | Non-Contact |
| Actuation | Standard |
| Coding level/tamper protection | Low |
| Design | Rectangular |
| Device type | RFID – Sensor |
| EPLAN Original Sent Date | 04/21/2022 |
| EPLAN Status | Published |
| Feature | Cascade, Quick Disconnect |
| Functional safety (SIL/PL) | SIL CL 3 |
| Item Status | RELEASED |
| Nominal voltage | 24 VDC @ 0.1 A each |
| Number of pins | 8 |
| Operating voltage | 24 V dc |
| Output type | OSSD |
| PL Rating | PL e |
| Protection class shaft | IP69 |
| Receptacle housing material B | Thermoplastic |
| Voltage supply connection | M12 Pigtail |
| Min Op. Temperature (C) | -25.0 |
| Max Op. Temperature (C) | 70.0 |
| Rated Operating Current | 50 mA + output loads |
| Response Time (ms) | 100 |
| Sn Typical | 13.0 |
| Sar Maximum (mm) | 25.0 |
| Sao Minimum (mm) | 10.0 |
| H Typical (mm) | 2.0 |
| Trip Latch Output | Trip |
Description
SI-RF Safety Switch
Coding: Low; Diagnostics: Series PNP
Reset: Automatic; Connector: 250 mm 8-pin M12 Pigtail QD
Used With: SI-RF-A
