EM Series Safety Extension Relays – Banner – EM-FD-7G4
Safety Extension Module
Inputs: 1 = output of primary device; 24 V ac/dc
Safety Outputs: 4 NO, 6 A; Aux Outputs: None
2.0 sec time delay; Terminal Block: Fixed; Width 22.5 mm
| Dimension (H x W x D in mm) | 82 x 22.5 x 118 |
|---|---|
| E-Stops/Rope Pulls | No |
| Electrical Life (Cycles @ VA) | 100,000 @ 1500 VA |
| Expandable | No |
| Gate Switch (NC/NC) Input | No |
| Gate Switch (NC/NO) Input | No |
| Gate Switch (OSSD) Input | No |
| In-Series Diagnostics | No |
| Independently Controlled Safe Outputs | 1 |
| Input Configuration | 1 NC |
| LCD Display | No |
| Light Curtains/Scanner without EDM Input | No |
| Max Operating Temperature (C) | 50 |
| Mechanical Life (operations in millions) | 10 |
| Motor Speed | No |
| Muting | No |
| Number of Safe Inputs | 1 |
| Output Configuration | 4 NO |
| PCCC | No |
| Power Consumption | 0.1 A |
| Recovery Time (ms) | 30 |
| Relative Humidity | 90% @ 50° C |
| Removable Terminals | No |
| Response Time (ms) | 35 (typical) |
| Safe Output Rating | Relay – 6 A |
| Safety Input - Single Channel | 40-100 mA @ 13-27 V ac/dc |
| Safety Mat | No |
| Safety Module Type | Relay Extension Module |
| Splittable Safe Output | No |
| Terminal Type | Screw |
| Device type | Safety Relay |
| EtherNet/IP | No |
| Item Status | RELEASED |
| Network protocol | No |
| Operating voltage | 24 V ac/dc |
| Power Good Output | AC/DC Universal |
| PROFINET | No |
| Protection class shaft | IP20 |
| Vibration | 10-55 Hz at 0.35 mm |
Description
Safety Extension Module
Inputs: 1 = output of primary device; 24 V ac/dc
Safety Outputs: 4 NO, 6 A; Aux Outputs: None
2.0 sec time delay; Terminal Block: Fixed; Width 22.5 mm
