These receptacles allow
installation of a connector to the external surface of an enclosure. They are best
suited to enclosures where terminals are close to the connector,
unless extended cable tails are ordered. The
standard cable tails supplied are 0.5m long. All are 2 core. They
are available in male or female to suit 7/8" and M12 connectors.
Solder cup receptacles and receptacles with 1/2"=14NPT, 1/2"-14NPSM,
3/4"-14NPT entry sizes are also available. The housing material of the connectors is
nickel plated brass or 316 stainless steel. |